SimScale simulation projects by yashsaksena | Page 1

yashsaksena's profile

Related to step-by-step tutorial of the biomedical workshop (session 1)

https://www.simscale.com/forum/t/biomedical-engineering-workshop-session-1-stress-shielding-in-a-hip-joint-prosthesis/36830/3

Sample project for how to set-up the Hex-Dominant Parametric mesh for flow around a vehicle body.

In this project a static analysis of a shaft under a torque load is demonstrated.

In this project a static analysis of an I-beam under remote force is demonstrated.

Tutorial project for Aerodynamic simulation of compressible flow over Airfoil

Tutorial project for linear static analysis of a crane

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Tutorial project for setting up the mesh using Hex-dominant automatic for external flow.

Tutorial project for setting up the Automated Hex-dominant for internal flow for an angled pipe geometry.

Public Profile

yashsaksena's profile