Set up your own cloud-native simulation in minutes.Start Simulating Now
Mounting Plate
0
2560
4
2560 4
0Statistics
1 Geometry
1 Mesh
1 Simulation setup
1 Result
1 Geometry 1 Mesh 1 Simulation setup 1 ResultAbout this project
I have tried to find the displacement and von Mises stress of the mounting plate when subjected to a pressure of 1MPa on the cut out section in plate. It is fixed at back with the 4 bolts. The model is generated by me using Creo 2.0 and uploaded as a .stp file.
Related Projects
Project History
vinugholap created this project