SimScale simulation projects by tom88 | Page 1

tom88's profile

In this exercise, you will use linear static analysis to analyze several configurations of an aircraft engine bracket under a vertical load.

In this exercise, we will consider the deflection of a cantilever beam with a concentrated load at the free end. We can calculate the deflection by hand and via a static analysis using the SimScale platform.

Incompressible Fluid Flow analysis of two globe valves

In this exercise, you will complete a laminar pipe flow analysis

This project simulates laminar flow through a straight circular pipe.

This project simulates compressible turbulent flow through a de Laval nozzle.

This project validates distributed pressure and nodal stresses for a thick plate under pressure load.

The goal of this case study is to validate the Convective Heat Transfer analysis type on the SimScale platform.

Tutorial project for heat transfer in an engine piston

Tutorial project for a thermal analysis of a differential casing. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

This project shows an electronic cooling application of ICs on PCB using the conjugate heat transfer transfer technique, abbreviated as CHT. Conjugate heat transfer defines processes which involve variations of temperature within solids and fluids due to thermal interaction.

Tutorial project for setting up a Multi-phase flow simulation

Tutorial project for Aerodynamic simulation of compressible flow over Airfoil

Tutorial for In-compressible Turbulent flow through a cyclone seperator

In this tutorial, a aerodynamic analysis of a F1 frontwing is presented. The flow around the wing is modeled as an incompressible, turbulent flow using a k-epsilon turbulence model. This tutorial is based on the first part of the SimScale F1 Simulation workshop series about aerodynamics.

Tutorial: Incompressible turbulent airflow around a spoiler

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Public Profile

tom88's profile