SimScale simulation projects by thomazin | Page 1

thomazin's profile

Tutorial project for a stress analysis of a connecting rod. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Tutorial project for a thermal analysis of a differential casing. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

The purpose of this project is to determine whether the stresses developing in the lift mechanism remain below yield strength. A 2:1 factor of safety is desired. If stress is too high, then the mechanism will need redesign.

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Public Profile

thomazin's profile