Looking for valve simulation templates? Sign up for SimScale and join the largest engineering simulation community in the world! | Page 1

Calculate the Torsion of extended Stem for the Rod only

Incompressible flow inside two globe valves

A Tesla valve, called by Tesla a valvular conduit, is a fixed-geometry passive check valve. It allows a fluid to flow preferentially in one direction, without moving parts. The device is named after Nikola Tesla, who was awarded U.S. Patent 1,329,559 in 1920 for its invention.

Model provided by Axel Ligon (https://grabcad.com/library/standard-faucet-tap-einhebelmischer-inv2014-1). Demo CFD simulation of a mixer tap water faucet.

Project for the final exam of the professional training - available here: https://www.simscale-academy.com/

In this exercise, you will work with the hex-parametric mesher to mesh a valve geometry. Check out www.simscale-academy.com for more classes on simulation.

Updated geometries for the section Incompressible Fluid Flow analysis of two globe valves of the Introduction to Computer-Aided Engineering (CAE) course - www.simscale-academy.com

This project involves meshing internally a Ball Valve, and then simulating its' operation when water flows through it. A ball valve is a structure that is placed between two pipelines, connecting them through its' hollow interior by utilizing two diametrically placed holes. For this case, the floating ball has a hollow cylinder through its center, with a diameter same as the inner one of the pipelines. The Cylinder is not parallel to the pipes, and instead it is placed diagonally. A steady state incompressible flow simulation is executed to visualize the flow and its' re-circulation, as well as the critical areas of the pressure drop.

The objective of this project was to calculate the pressure drop across a ball valve using the CFD method. For this, three simulation scenarios were created: fully open valve (0 degrees), partially closed valve in 40 degrees and partially closed valve in 70 degrees.

In this study, the flow coefficient (K_v value) of a globe valve was calculated.

This project establish a comparison between 120mm and 130mm EBT valve.

This project simulates incompressible flow through an industrial scale Butterfly Valve.

This project simulates water flow through a Gate valve by using the Incompressible flow simulation type. Main purpose of the project is to obtain the forces acting on the half-open valve and flow pattern through the pipe as it crosses the valve section.

This project simulates opening of a pressure relief valve using 6 DOF body motion.

This project shows the stress analysis of a pressure relief valve (PRV) under operation.

In this project a nonlinear dynamic analysis of a valve spring is demonstrated.

A turbulent flow simulation of a ball valve is demonstrated in this project.

A turbulent flow simulation of a butterfly valve is demonstrated in this project.

This project simulates water flow through a double flanged check valve.

This project simulates the effect of valve-positions on fluid flow through a pipeline network.

This project simulates the flow of air through an open Treadle Valve.

valve | SimScale Project Library | Page 1