Looking for laminar flow simulation templates? Sign up for SimScale and join the largest engineering simulation community in the world! | Page 1

Attempting to simulate method of creating a laminar airflow air curtain for the purpose of isolating between sawdust producing areas of a workshop and the surrounding area

Inlet diameter D, outlet diameter D/2, Pipelength 20 D

Otimizacao de um sistema de ar condicionado.

to optimize air distribution in university room
cfd

To check the behaviour of the flow in pipe.
Steady state
Here, given model has two flow inlet and one outlet, geometry has to bounded with the wall. so, check the velocity behaviour in  pipe inlet to outlet, using fluid as a water to determine flow rate in the  pipe with help of the simscale tool

To determine the type of the flow in the pipe.
In Compressible  fluid flow analysis.
Here, given geometry pipe has two inlet and one outlet. Using fluid as water to the flow in pipe. velocity at inlet 1 & 2 has different rate. to find out the rate of the flow of water at outlet as pressure.

to analyze the quality of the the pipe that we are going to use in our oxygen analyzer

The aim of the project was to implement a porous media option and try to understand the basic concept behind through CFD setup. for this case, incompressible flow simulation type was used. In this case, the pressure drop across the two was calculated and done some iteration.

Convective Flow inside a Light Bulb is simulated.

Key Results:

1. Temperature distribution inside the light bulb

2. Behavior of flow due to convection

This project simulates laminar flow through a straight circular pipe.

This project simulates convective flow inside a Light Bulb.

This project simulates flow of water through a spillway.

laminar flow | SimScale Project Library | Page 1