Looking for conjugate heat transfer simulation templates? Sign up for SimScale and join the largest engineering simulation community in the world! | Page 3

This project is do a analysis on the temperature versus time when a solder trace (exposed to the air) is subjected to a current that produces 1.872 Watts energy within the piece.

Temperature distribution through a U-type heat exchanger.

Server rooms house sensitive hardware that can be damaged easily if exposed to extreme temperatures. So, the aim of this project is to find out the heat transfer in that room for material air. For heat transfer I did Conjugate Heat Transfer simulation analysis which tells us about the heat transfer between fluid air and the solid material of the server room.
So, from this project we can optimize the ventilation system design for server room in future planning.

In this project we are analyzing the steady state heat transfer of a water cooled hot plate. The primary targets of the evaluation are to find the maximum temperature within the hot plate, the temperature change of the cooling fluid, and the pressure loss through the the water tube system. Solutions from the conjugate heat transfer CFD solution are compared to the theoretical solutions to determine the overall correlation of the values.

This is a conjugate heat transfer study in an electronics cooling project. With respect to the incoming air flow through the enclosed tunnel on the circular pin type heat sink design, and maximum component temperature, maximum power limit for the component was calculated.

Conjugate Heat Transfer: Cooling of electronic sink

Conjugate heat transfer validation. Air flow over a plate is considered for this case. The setup of CFD model and comparative results are explained in SimScale forum comments section of this project.

This project includes the shell and tube heat exchanger simulation using the conjugate heat transfer technique, abbreviated as CHT. Conjugate heat transfer defines processes which involve variations of temperature in solids and fluids due to thermal interactions.

This project shows an electronic cooling application of ICs on PCB using the conjugate heat transfer transfer technique, abbreviated as CHT. Conjugate heat transfer defines processes which involve variations of temperature within solids and fluids due to thermal interaction.
You can find the tutorial for this project here: https://www.simscale.com/docs/tutorials/conjugate-heat-transfer-cooling-of-electronic-sink/

This project analysis the cooling of a PCB board via CHT

CHT simulation of heat sink with temperature source

A Test of the CHT Capability on a heat exchanger

conjugate heat transfer | SimScale Project Library | Page 3