SimScale simulation projects by sshubham_sharm | Page 1

sshubham_sharm's profile

About how to setup thermal management for an electronic enclosure

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Tutorial project for a thermal analysis of a differential casing. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

This advanced thermal management tutorial describes the setup and analysis of electronics cooling on an electronics box containing different electronic components being cooled by the airflow of a fan.

to find out the heat dissipation and fan requirement for cooling the box

Behavior ANALYSIS OF TRANSDUCER IN DIFFERENT ENVIRON

to check the load bearing capacity of M3 screw and its ultimate load capacity

to find the failure stress in the material

Public Profile

sshubham_sharm's profile