SimScale simulation projects by soheilhaghigha | Page 1

soheilhaghigha's profile

I'm trying to simulate the comfort factor within an office space during summer time based on different cooling concepts: vanes, big channel, without cooling - Copy

This is a test for a HVAC simulation .: case study Baseline model - Copy

This project aims at analyzing and understanding how thermal comfort can be achieved in an office space of 4 occupants.
The scenario takes place in summer conditions ( 42C outside temperature and  65 relative humidity). The thermal comfort metric used in this project is predicted mean vote (PMV) and the target range is -0.5/0.5.
The original scenario results, where the external walls have a low insulation value and the inlet temperature is 19.85 degrees Celsius,  show exceeding PMV values (2.8 on average at the humans' surfaces) that are beyond the recommended ASHRAE-55-2017 values.
To improve the PMV values and the energy consumed in order to cool the occupants, the insulation value for the walls and windows were changed to reflect the impact of adding an insulation layer. The results of the improved scenario show a significant saving in energy spending whereas the thermal comfort of the occupant isn't changed significantly. 
The next stage is to adjust and find an inlet temperature at a suitable level in order for the occupants to feel comfortable. The flowrate value wasn't modified because it would produce airspeed and therefore negatively impact the PMV values.
Working with a difference between the average room air temperature and the inlet temperature of 9 degrees Celsius, and aiming for a 22degres Celsius average room temperature as a starting point, an inlet of 14 degrees was used.
Simulation runs were performed at 14,13,12,11, and 10 deg Celsius until the measured PMV values for the occupants were all within the target range of (0.5/0.5). The  satisfactory condition scenario was determined to be with a 10 degrees Celsius inlet temperature. - Copy

The objective of this simulation is to show how CFD can be used to predict the flow from a ceiling fan in an indoor space in steady-state.  This can be used to demonstrate capability, or as a template for more complex problems in HVAC design. - Copy

Flow through different vent diffuser designs and analysis of occupant thermal comfort. - Copy

This project aims to obtain the airflow inside two design alternatives for an HVAC system of a theater room. Convective heat transfer simulation is used to obtain the flow pattern inside the room. Thermal comfort parameters such as PMV (Predicted Mean Vote) and PPD (Predicted Percentage of Dissatisfied) are obtained along with the mean age of fluid. - Copy

Assess the thermal comfort in an office environment by simulating the flow field of conditioned air inside the room. - Copy

Simulation of HVAC conditions in my home. - Copy

Based on youtube video: Ductwork sizing, calculation and design for efficiency: HVAC Basics and full worked example by The Engineering Mindset - Copy

Public Profile

soheilhaghigha's profile