SimScale simulation projects by simscale | Page 1

simscale's profile

Final results for the enclosure snap fit tutorial.

Study of CO contamination inside a car park

This case aims to validate the cavitation model, available for the subsonic solver in a pipe section with an orifice plate

This tutorial showcases how to use SimScale to run an electromagnetics simulation on a Magnetic Lifting Machine.

A structural analysis tutorial that focuses on the impact of forces acting on a fixed bracket.

The results of this SimScale validation case of a centrifugal pump are compared with the results of the study by WANG Xiu-yong and WANG Can-xing entitled Performance Prediction of Centrifugal Pump Based on the Method of Numerical Simulation.

The SimScale Multi-purpose solver was used.

The case analyses a dam break with an overflow over a rectangular box.

The aim of this case is to validate the following parameters inside a pipe with a butterfly valve:
Pressure drop using the Multi-purpose solver in SimScale

This tutorial project aims to showcase how to set up and run a simulation for a pump geometry. The Multi-purpose meshing tool was used with coarse meshing.

This tutorial teaches how to run a transient incompressible flow simulation using the Multi-purpose analysis type in SimScale using the AMI rotating zone on a Francis turbine.

In this project, a multiphase flow analysis of a globe valve is performed.

Step-by-step tutorial for a mesh creation of an F1 front wing model, using the Hex-dominant parametric approach.

F1 Front Wing Geometry for Front Wing Tutorial

Fan forced convection cooling of an EV battery pack

This project shows the bending of an Aluminium pipe through rolling process.

This project uses an Incompressible (LBM) analysis type to evaluate the aerodynamics of a truck through a transient simulation.

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Tutorial on incompressible flow simulation for aerodynamics studies, using SimScale Standard mesh algorighm.

Tutorial project for a thermal analysis of a differential casing. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

FEA Simulation of a Sheet Metal Stamping Process with new format geometries

This nonlinear static analysis shows the sliding of a rubber seal on a rigid body due to applied displacement.

This study aims at validating the CHT v2 solver of SimScale GmbH with IBM as an option. A peer-reviewed publication focusing on thermal analyses and cooling of an RF electronics package has been used as the basis for this validation case.

This tutorial case shows how to perform an external flow analysis of a Car.

This project demonstrates the validity of the CHTv2 and IBM solver. through a Conjugate Heat Transfer (CHT) analysis of a battery pack.
 
Validation Experiment Reference:
A peer-reviewed publication on battery pack thermal validation  has been used as basis for this study (with reasonable assumptions and approximations): 
https://www.mdpi.com/1996-1073/10/8/1157

Example project on how to export a deformed shape in Paraview

Tutorial project for a stress analysis of a connecting rod. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

This project aims to showcase the different configuration options for the standard meshing tool, including basic and advanced settings. The various refinements are also covered.

This tutorial teaches how to run a transient incompressible flow simulation using the Subsonic analysis type in SimScale using the AMI rotating zone on a Francis turbine.

Conjugate heat transfer simulation tutorial with U-tube heat exchanger.

Public Profile

simscale's profile