SimScale simulation projects by saravananmuthu | Page 1

saravananmuthu's profile

The effect of numerics on the simulation quality and convergence time.

In this Project effect of courant number discussed with multiphase flow model

In this Project the effect of layer settings in the velocity profile is studied

FEA Master Class Session 3 handout: In this project the drop test of an iPhone 6 has been performed with and without case.

Its about a Drone that i created with Autodesk Fusion 360 i want to do some FEA and CFD analysis

In this exercise, you will complete a laminar pipe flow analysis

Incompressible Fluid Flow analysis of two globe valves

In this exercise, you will perform a simple heat transfer analysis on the SimScale Platform and then compare the results to a hand-calculated solution.

In this exercise, you will use linear static analysis to analyze several configurations of an aircraft engine bracket under a vertical load.

In this exercise, we will consider the deflection of a cantilever beam with a concentrated load at the free end. We can calculate the deflection by hand and via a static analysis using the SimScale platform.

Tutorial project for a stress analysis of a connecting rod. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Public Profile

saravananmuthu's profile