SimScale simulation projects by rlanjekar | Page 1

rlanjekar's profile

In this SimScale project, inspired by this article on cooling effectiveness, a CFD thermal analysis is used to predict the temperature of 30 commercial Li-ion 18650 cells under multiple casing designs and inlet flow conditions. The goal is to find the minimum cooling power so that the cells are kept below 40C. - Copy

This project demonstrates the validity of the CHTv2 and IBM solver. through a Conjugate Heat Transfer (CHT) analysis of a battery pack.
 
Validation Experiment Reference:
A peer-reviewed publication on battery pack thermal validation  has been used as basis for this study (with reasonable assumptions and approximations): 
https://www.mdpi.com/1996-1073/10/8/1157 - Copy

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Public Profile

rlanjekar's profile