SimScale simulation projects by rkondo | Page 1

rkondo's profile

Tutorial for Static stress analysis of Underrun protection device

comparison between H steel and H steel with FRP

Comrarison between plane pine and pipe with  FRP

try to the simplification and weight saving of a structure

Tutorial: Incompressible turbulent airflow around a spoiler

The study of  Thermal Analysis of plate made from Cast Iron, Copper and Gold

analysis of deerailleur hanger by using bi-linear aluminium model

Thermal analysis of a fin plate  fluid trainer for bile

to check Stress Concentrations and Singularities

Tutorial project for linear static analysis of a crane

Theoretical value is 25.575MPa
Internal Pressure: 3MPa,OD:114.3mm,Thickness:6mm

The maximum stress in a 20mm,50mm Steel beam,  500mm long, carries load of 1000 N.
The maximum stress in the beam can be calculated 150MPa.

Tutorial project for a thermal analysis of a differential casing. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Engineering to the aerodynamic performance of racebike frame

This project includes everything you need to get started with the homework assignment of our makers workshop

theoretical value
Cauchy stress: yy max 30MPa  ,  10MPa
Cauchy stress xx max 3.5MPa

Theoretical value
Circumferential stress:45.55MPa

The maximum stress in a 20mm,50mm Steel beam, 500mm long, carries load of 1000 N. The maximum stress in the beam can be calculated 150MPa.

to simulate quake damping pendulums at building

In order to verify the difference between the theoretical value , I started this calculation.
Theoretical value 2.195mm

Tutorial project for a stress analysis of a connecting rod. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

In this project vibration analysis of jet engine is performed.

calculation bikes crank : crank length 170.0mm, 300W, 90rpm

Public Profile

rkondo's profile