SimScale simulation projects by pteja | Page 1

pteja's profile

Pedestrian Wind Comfort Analysis for assessing wind speed through the city of Rotterdam

Incompressible Fluid Flow analysis of two globe valves

CAE_Heat Transfer in a Beam -heat transfer anaysis using code aster

Heating of a Compact Fluorescent Light (CFL) -conduction heat transfer

continuation of Optimization of a Globe Valve project with modified design geometry

n this exercise, we will consider the deflection of a cantilever beam with a concentrated load atthe free end. We can calculate the deflection by hand and via a static analysis using the SimScaleplatform

A local company wants to determine if they can reduce the pressure losses in their globe valve. they want to do an incompressible fluid flow analysis to test their current design and a modified design that has been proposed by their engineers which is predicted to have better performance characteristics.

A local company wants to determine if they can reduce the pressure losses in their globe valve.The want to do an incompressible fluid flow analysis to test their current design and a modified design that has been proposed by their engineers which is predicted to have better performance characteristics.

This project involves the simulation of ventilation in an aircraft cabin. There are 6 comparison configurations with 3 different inlets and 2 outlets.

The project simulates 2 cases of aircraft wings to compare the aerodynamic effects.

reference project for aircraft cabin flow simulations

This aircraft simulation shows the airflow distribution around an aircraft design at low subsonic compressible flow regime.The flow of air around the commercial aircraft model was simulated via the Reynolds-averaged Napier-Stokes (RANS) method. The flow conditions were Mach number M 0.35, Angle of Attack 2 degrees, Pressure P  100000 pa and temperature T  0 degrees Celsius. For turbulence modeling, the k-omega SST model was used with the wall function approach. A ramping of the velocity boundary condition was applied up to the free stream value for better convergence.

This project simulates air flow around an Aircraft at low sub-sonic compressible flow regime.

Tutorial project for Heat transfer in a heat-sink

This project shows an electronic cooling application of ICs on PCB using the conjugate heat transfer transfer technique, abbreviated as CHT. Conjugate heat transfer defines processes which involve variations of temperature within solids and fluids due to thermal interaction.

Study and analysis of concept of Y+,  by Wall modelling technique so that to predict the actual wall distance Y from an approximated Y+ and make an assessment whether the results are correct or not and therefore to confirm that the boundary layer is correctly solved .

Study and Analyse the effects of  Courant number on Convergence speed and stability.

The effect of numerics on the simulation quality and convergence time.

Public Profile

pteja's profile