SimScale simulation projects by podhavani | Page 1

podhavani's profile

Find deflection in cantilever  beam .
Static
In this exercise, we will consider the deflection of a cantilever beam with a concentrated load at the free end.

In this exercise, we will consider the deflection of a cantilever beam with a concentrated load at the free end. We can calculate the deflection by hand and via a static analysis using the SimScale platform.

In this exercise, we will consider the deflection of a cantilever beam with a concentrated load at the free end. 
We can calculate the deflection by hand and via a static analysis using the SimScale platform.
Heat transfer

In this exercise, we will consider the deflection of a cantilever beam with a concentrated load at
the free end. 
Static
deflection of a cantilever beam with a concentrated load at the free end.

Incompressible Fluid Flow analysis of two globe valves

A     local     company     wants     to     determine     if     they     can     reduce     the     pressure     losses     in     their     globe     valve.  The     want     to     do     an     incompressible     fluid     flow     analysis     to     test     their     current     design     and     a     modified  design     that     has     been     proposed     by     their     engineers     which     is     predicted     to     have     better     performance  characteristics.

In this exercise, you will perform a simple heat transfer analysis on the SimScale Platform and then compare the results to a hand-calculated solution.

To determine the type of the flow in the pipe.
In Compressible  fluid flow analysis.
Here, given geometry pipe has two inlet and one outlet. Using fluid as water to the flow in pipe. velocity at inlet 1 & 2 has different rate. to find out the rate of the flow of water at outlet as pressure.

To check the behaviour of the flow in pipe.
Steady state
Here, given model has two flow inlet and one outlet, geometry has to bounded with the wall. so, check the velocity behaviour in  pipe inlet to outlet, using fluid as a water to determine flow rate in the  pipe with help of the simscale tool

Public Profile

podhavani's profile