SimScale simulation projects by lveley | Page 1

lveley's profile

Base length duct with 3.0-5 gerlach areas

Base duct length with more gerlach shaping

Duct with an outlet to inlet ratio of 2.5

Short duct with 0.5 inch extra past lip Rev3

Duct with an outlet to inlet ratio of 1.5

Base Duct with lip and extension past the

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Tutorial project for a stress analysis of a connecting rod. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Public Profile

lveley's profile