SimScale simulation projects by lakomiec_karol | Page 1

lakomiec_karol's profile

estimation of wind pressure, wind loads for tiandular shaped steel industrial hale - Copy - Copy

estimation of wind pressure, wind loads for tiandular shaped steel industrial hale - Copy

estimation of wind pressure, wind loads for tiandular shaped steel industrial hale

estimation of wind pressure, wind loads for rectangular building - speed of wind 32 (factored *1,45 to get the results sililar to eurocode)

estimation of wind pressure, wind loads for rectangular building - speed of wind 22m/s, but results are smaller comparing to the eurocode standards. you have to miltipy 1,45 speed of wind to achive the same sesults as according to the eurocode

WRONG guage pressure 1000hPa. it should be 0. estimation of wind pressure, wind loads for rectangular building

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation. - Copy

Public Profile

lakomiec_karol's profile