SimScale simulation projects by knoorafkan | Page 1

knoorafkan's profile

Using convective heat transfer analysis to evaluate the cooling system of a data center. Different scenarios will be assessed. - Copy

Pedestrian Wind Comfort Analysis for assessing wind speed through the city of Rotterdam

LED Spotlight project, aiming a bring the temperature of the diodes of a LED spotlight design below the maximum allowed temperature of 100C. A Conjugate Heat Transfer v2.0 analysis is used.

Computation of the thermal comfort and flow field inside a car cabin

In this tutorial, the transport of exhaust gases into the atmosphere is simulated. Gases will come out of two chimneys of a plant.

This tutorial project aims to showcase how to set up and run a simulation for a pump geometry.

This project aims to showcase the process of setting up and running an incompressible analysis. As a geometry, we have a Francis turbine. A MRF Rotating Zone is used for the runner.

This tutorial project aims to showcase how to set up and run a simulation for a pump geometry. The Standard meshing tool was used.

This tutorial contains a thermal comfort project, which analyses the duct positioning inside a theater, in order to have an effective ventilation system.

Computation of the thermal comfort including Local Mean Age of Air and radiation in a meeting room using CFD simulation.

Tutorial project for a thermal analysis of a differential casing. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Public Profile

knoorafkan's profile