SimScale simulation projects by jmckinley | Page 1

jmckinley's profile

This project shows the bending of an Aluminium pipe through rolling process.

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Tutorial project for a thermal analysis of a differential casing. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

In this validation project, a dynamic nonlinear impact analysis of an elastoplastic bar is demonstrated.

This project performs a quasi-static compression analysis of a steel punch on an aluminium cylinder.

Tutorial project for a stress analysis of a connecting rod. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

In this project a dynamic analysis of the rolling of an aluminium plate is demonstrated.

Public Profile

jmckinley's profile