Set up your own cloud-native simulation in minutes.Start Simulating Now
Simple 16x20 blower nozzle
414
1
Statistics
3 Geometries
3 Meshes
3 Simulation setups
3 Results
3 Geometries 3 Meshes 3 Simulation setups 3 ResultsAbout this project
A simple blower nozzle designed to fit the 16x20mm outlet of a 5015 blower common on 3D printers. My blower was measured to have a maximum static pressure of 18 mmH20 and is specified with a max CFM of at least 3. This nozzle is designed to give 15m/s outlet velocity at 1.5 CFM with 14 mmH20 static pressure, which should approximately match the load curve of my blower.
