SimScale simulation projects by hiuluom | Page 1

hiuluom's profile

Pedestrian Wind Comfort Analysis for assessing wind speed through the city of Rotterdam

Inner pressure acting on inner radius of cylinder, 2D fracture

Tutorial project for linear static analysis of a crane

Consider distribution of heat in Data center

carry out simulation a distribution of temperature inside enclosed.

Conservation motion of fluid inside the moving tank

This project simulates Scalar Transport mixing in turbulent T-Junction pipe flow.

The tutorial project is a sample Electronic cooling sink which consists of 3 solid regions and 1 fluid region. The solid regions are two FB-4 chips, which have a higher initial temperature and a heat sink over one of the chips. The air flows over the solid regions to remove the heat from it.

This project simulates the rising of a bubble in fluid due to buoyancy.

This project simulates air flow in an aircraft cabin. Two configurations and their effect on the air flow pattern are shown.

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

This project simulates compressible turbulent flow through a de Laval nozzle.

The effect of numerics on the simulation quality and convergence time.

Calculate the force and coefficient based on Ahmed study.

CFD parametric study of the duct with varied blade angle

The air flow around a football is simulated with focus on the effects of the pattern on the football surface and spinning of the ball.

This project shows an electronic cooling application of ICs on PCB using the conjugate heat transfer transfer technique, abbreviated as CHT. Conjugate heat transfer defines processes which involve variations of temperature within solids and fluids due to thermal interaction.

Consider water material low and high temperature inlet.

This project simulates incompressible flow through an industrial scale Butterfly Valve.

Tutorial project for post-processing of Thermal Comfort Parameters Locally in ParaView.

ventilation for conjugate heat transfer problem

This project simulates Discrete Phase Model for a monodisperse gas-solid fluidised bed

Public Profile

hiuluom's profile