SimScale simulation projects by ff_designer | Page 1

ff_designer's profile

The tutorial project is a sample Electronic cooling sink which consists of 3 solid regions and 1 fluid region. The solid regions are two FB-4 chips, which have a higher initial temperature and a heat sink over one of the chips. The air flows over the solid regions to remove the heat from it.

This project shows an electronic cooling application of ICs on PCB using the conjugate heat transfer transfer technique, abbreviated as CHT. Conjugate heat transfer defines processes which involve variations of temperature within solids and fluids due to thermal interaction.

Analysis of a Heat Sink with one semiconductor attached and 3 fan inlets for refrigeration.

Heat Sink. 
20 semiconductors. 
Fan inlet.

Thermal analysis of a Heat Sink with some components attached and dual-fan refrigerated.

Heat sink. 
2 power sources (dissipation).

Analysis using Conjugate Heat Transfer and Imprinting.

Thermal analysis of a nozzle, using turbulent flow (k-epsilon) and Conjugate Heat Transfer (CHT).

Analysis using CHT of a Heat Sink with some semiconductors attached to it, both cooled with a fan whose curve pressure-CFM is given as a boundary condition. Thermal problem is performed and simulated, focusing on main temperature fields, power dissipation and possible export to ParaView for suitable post-processing.

Tutorial project for a thermal analysis of a differential casing. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Analysis of incompressible flow through axial fans, focussing on the visualization of the velocity fields.

Analysis of a Heat Sink with VARIOUS SEMICONDUCTORS attached to it, acting as power sources, and the inlet being characterised by an open air entrance (with NO FAN modelling).

Analysis using CHT of a Heat Sink with a Semiconductor attached.

Analysis using CHT of a heat sink with some semiconductors added.

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Public Profile

ff_designer's profile