SimScale simulation projects by ddiepholz | Page 1

ddiepholz's profile

Conjugate heat transfer simulation tutorial.

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Move thermistor sideways directly over trace and monitor thermistor temp

Monitor thermistor temp when moved .050 in. to side.

Compare temps. with thermistor moved forward 1.0mm.

Look at  temps as a result of different ribbon patterns

HT simulation of aluminum block and heater assembly with thermistor.
Compare round face temps with original, and look at thermistor sensitivity.

Heat transfer simulation of resistance ribbon, mica, ceramic top

Determine temperature of small aluminum top with profiled input heat flux

Determine current flow, equations the same as heat transfer

Current flow, equations are the same as HT

Current flow thru trace, same eqns. as HT

Determine current denity. Eqns same as HT

Determine current flow through square corner traces.
Eqns. the same as HT

Determine current flow thru trace. Eqns. same as HT.

Determine current flow, eqn's same as HT. Made trace thick so it would mesh. Results should be the same despite different z dim.

Alum top 2 with profiled heat. Inset changed to 9in. diameter.

Public Profile

ddiepholz's profile