Thermomechanical

This analysis type is used to determine the structural and thermal stress of a solid object subjected to thermal and structural loads. First the temperature field is solved and then applied as a load for the structural analysis. | Page 45

This example is one of the best thermal benchmarks. 

This project shows the thermo-structural analysis of a 8 pin Small Outline Integrated Circuit (SOIC) chip with applied heat flux on the main chip core surfaces.

A brittle Wine Glass used in Intro to FEA Training to learn about Thermal Stress Analysis.

Thermal stress causes to break an alumina sheet

Simulation of heat generation in brake disc

Basic solid mechanics model for structural integrity assessment

In this project, thermostructural analysis of two different designs of spark plug were performed

This project shows the thermostructural analysis of a steam stop valve considering static temperature and pressure.

a piston diameter of 180 mm , with the projection

In this simulation of a space glider, the thermal and mechanical loads on the space glider's way to space were examined (from a sea-level position to a height of 100 km).

This project shows the thermostructural analysis of basket strainer.

Furnace wall section to study thermal shock.

In this project, a thermal shock analysis of a globe valve is performed.

This project shows the thermo-structural analysis of a cracked pipe.

In this project a thermostructural analysis of a shell and tube heat exchanger is demonstrated.

Analysis of the thermal stresses generated by thermal expansion - contraction differences between an aluminum housing and steel bearings

In this project the shrink fit analysis of tool holder is performed.

This project shows the thermo-structural analysis of a steam stop valve considering static temperature and pressure.

Simulation of the heat transport inside a specific heat sink - copy from @cloock's project to test meshing and sim.

This project performs an uncoupled thermomechanical analysis of a fixed beam under changing temperature.

Thermomechanical | SimScale Project Library | Page 45