Thermomechanical

This analysis type is used to determine the structural and thermal stress of a solid object subjected to thermal and structural loads. First the temperature field is solved and then applied as a load for the structural analysis. | Page 44

In this project a transient thermo-structural analysis of a spherical pressure vessel is demonstrated.

Wärmeverteilung in einem beheiztem feinmechanischem Aluminiumteil

Simulation to select the best SMT method of two different IC's

In this project, thermal stress analysis of polymeric photo-thermal microactuator was performed considering different bending angles and arm widths.

This project shows the thermo-structural analysis of a 8 pin Small Outline Integrated Circuit (SOIC) chip with applied heat flux on the main chip core surfaces.

Transient thermal analysis of sample heated by concentrated CO2 lASER

PCB with two QFP microchips- one with a heat sink, the other without.

This meshing tutorial shows how to setup the Tetrahedral automatic, Tetrahedral parametric and the Tetrahedral with local refinements for a structural analysis simulation.

In this project, thermostructural analysis of two different designs of spark plug were performed

The bar subjected to temperature difference due to temperature bar try to expand but the expansion is arrested by fixed boundary

Project for Heat transfer in a heat-sink and stresses in a PCB

Checking the pipe for strength at a given temperature

This example simulation shows the heat transfer in an engine piston due to a convective heat flux.

Part of the front screen for calculating.

thermal simulation of a cylinder just to get started with Simscale

This project deals with thermo mechanical simulation of reactor

An example of thermal bar with simple boundary conditions

This is a tutorial project in which thermostructural analysis of a PCB is performed.

Thermomechanical | SimScale Project Library | Page 44