Static

This analysis type is used to determine the displacements and stresses in structures or components caused by the applied constraints and steady loads - inertia and damping effects are ignored. A Static analysis can be either linear or nonlinear.  | Page 131

origami 3d models used for capstone - Copy - Copy

Examination of Plate Bending in Column Wall with Shear Tab Connection

This project demonstrates the static stress analysis of three aircraft engine bearing bracket models considering both linear and nonlinear material definition. The models are tested with horizontal and vertical loading conditions as provided on the challenge page of GrabCAD. - Copy

This project focus on the stress analysis of two different models of cardiovascular stent using two different materials - 316 LN Stainless Steel and L605 Co-Cr.

Tutorial project for a stress analysis of a connecting rod. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation. - Copy

Universal joint for heavy plate mill, with external diameter of 1000 mm

Template for the convergence study course in Coursera - Copy Geethu bindhu anil

this pedagogical model shows a cantilever beam fixed in a wall. Two parts are modeled. The beam is loaded by his own weight and by a vertical force in the middle of the beam. - Copy

study the buckling of the trhust ring of a liquid propelled rocket

Template for the convergence study course in Coursera - Copy

Static | SimScale Project Library | Page 131