Multiphase

This analysis type is used to simulate the time-dependent behavior of fluid mixtures, for example air and water. The analysis is carried out using the VoF (Volume of Fluid) method which is a standard approach for the computation of multiphase systems. | Page 50

Floating body simulation using 6 DOF method to study the object interaction with waves ..

Get familiar with platform simulate tool of flow

The good old plumbus.
- stressing the plumbus
- fleeb juice application
___
Geometry by Luke Fakult: https://grabcad.com/library/plumbus-1

Modern interpretation of a catboat hull design

Studying the size of capitation in order to achieve minimum drag coefficient  on water submerged body

In this Project effect of courant number discussed with multiphase flow model

The purpose of this project is to validate the accuracy of the solver for transport and distribution of Gas (passive scalar) in an indoor environment.The airflow pattern (velocity) and concentration results from CFD are to be compared with experimental data obtained from full-scale tests.

The task is to run simulations at different Courant numbers and examine the effects on the
convergence speed and stability.

Hot air flow in pipes to study flow distribution and pressure drop

Find best hole number at something standard and 1 mm diameter holes

test area 2, diameter 7mm ( d is 1mm circle times 50)

Multiphase | SimScale Project Library | Page 50