Harmonic

This analysis type is used to determine the response of a structure under steady-state periodic (sinusoidal) loading at a given range of frequencies. | Page 5

Using harmonic motion to simulate an earthquake

It aims to validate the random vibration response of a square cantilever beam, where the beam is excited by the Base excitation boundary condition in SimScale Harmonic analysis solver. - Copy - Copy - Copy - Copy - Copy

This project aims to showcase how to set up a harmonic analysis for an airfoil geometry. It is a continuation of the Frequency Analysis of an Airfoil (1/2) tutorial. - Copy

We will find the eigen modes of a simple structure and use the results to create forces which should only excite a single mode. In this way the dynamic simulation will show mechanical orthogonality.

Target: To find the maximum flow with minimum levels of vibration for the cross flow fan. This is a sample project to show the air flow for particular vibration experienced by the fan. Design changes needs to be made to narrow down to the best design - Copy

Geometry and harmonic analysis for a vibration test

Tutorial project for linear static analysis of a crane - Copy213111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111

It aims to validate the random vibration response of a square cantilever beam, where the beam is excited by the Base excitation boundary condition in SimScale Harmonic analysis solver. - Copy - Copy

Harmonic | SimScale Project Library | Page 5