Harmonic

This analysis type is used to determine the response of a structure under steady-state periodic (sinusoidal) loading at a given range of frequencies. | Page 21

testing deformations of rubber due to oscilations of the supporting base.

investigate the mechanical behaviour of the frame of the 3D printer
Two different simulations:
 Identify the critical eigenfrequencies of the printer frame. Later on, this information will be used as an input to analyze the physical response of our system.

to see stress distributions in a hollow pyramid

Ultrasonic horn study. 
Horn used for ultrasonic welding of thermoplastics

Test project to learn frequency response analysis after a basic modal analysis is carried out in Fusion 360 to predict critical response frequencies. The model material was Aluminium 6061-O, in Fusion 360. With the top of the plate modeled as a fixed support and the response is studied in the hanging mass.

testing the effects of harmonic force on flap

Trying to find the optimal balance between the weights of the crossbar and the pommel

Fused two parts together to simplify things

The aim of this project is to investigate the mechanical behavior of the 3D printer assembly. First to identify the critical eigenfrequencies of the printer frame, which will be used as an input to analyze the physical response of the system.

Dynamic 2D structural analysis of a formula student differential mount.
The part is sitting on a vibrating system between the engine and the differential. The part needs to be optimized for minimum weight.

Harmonic | SimScale Project Library | Page 21