Harmonic

This analysis type is used to determine the response of a structure under steady-state periodic (sinusoidal) loading at a given range of frequencies. | Page 2

Throwaway test to experiment with damping

discover if a trammel engine is sufficient

This project aims to showcase how to set up a harmonic analysis for an airfoil geometry. It is a continuation of the Frequency Analysis of an Airfoil (1/2) tutorial.

Nonlinear Static Analysis
and
Dynamic analysis
of a suspension - Copy

Structural simulation according to UN 38.3 T3 vibration test criteria - Copy

Using mechanical simulation
goal is to test if it can withstand forces over long time.

Wing Strut Static, Freq and Harmonic Analysis

Propeller_3.11.06-PropellerModel - Copy - Copy

It aims to validate the random vibration response of a square cantilever beam, where the beam is excited by the Base excitation boundary condition in SimScale Harmonic analysis solver. - Copy - Copy - Copy

Tutorial project for a stress analysis of a connecting rod. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Used for the Done in 60 Seconds Webinar with Onshape.

Harmonic | SimScale Project Library | Page 2