Harmonic

This analysis type is used to determine the response of a structure under steady-state periodic (sinusoidal) loading at a given range of frequencies. | Page 15

Test: jet engine mount - harmonic response

A marimba bar's modal behaviour is governed by the shape of its undercut. The aim of this project is to show how the shape affects the modes of vibration.

The project nevertheless starts with clamped-free bars in order to show fundamental results about modal analysis.
Various effects are shown:
- Size effect of the mesh (convergence study)
- Geometry effect (length, thickness and width)
- Material effect (E/density effect)

Free-Free simulation are run with a wood bar with and without the arch.
The presence of the arch helps push back the second transverse (out-of-plane) bending mode to nearly 4 times the fundamental frequency (this is not exactly the case in this simulation because the geometry of the arch is quite arbitrary).

Improvements are underway.

Maschine für die Belackung von Si-Substraten

Impact Test & Frequency Analysis on Pharmaceutical Packaging

48in unsupported rotor harmonics analysis

to simulate modal and vibration an analysis

Static Structure Analysis - Frequency Analysis
Maximum Stress and maximum deformation in cantilever beam carrying point load.

Project goal: Try the simscale solution for modal frequency analysis

FEA Simulation with 1x10-6 small feature suppression

Harmonic | SimScale Project Library | Page 15