Frequency

The Frequency analysis type is used to calculate the natural frequencies of constrained or free parts and assemblies. Besides the numerical value of the eigenfrequencies, the results provide insights into the deformation behaviour of the corresponding eigenmodes. | Page 75

This project conducts a dynamic analysis of a pinned bar under gravitational load

General analysis of a PCB board.
Vibration analysis of PCB and casing.
Project from the session on 02 02 2016

This acoustics simulation shows the frequency analysis of the Olympic Tower in Munich with first ten natural eigenfrequencies.

This project performs the calculation of eigenfrequencies of an unconstrained sphere.

In this project, a Solid Mechanics Frequency Analysis was done to determine the eigenfrequencies and corresponding eigenmodes - vibrational modes - of a tuning fork

This project contains everything you need to work on your homework assignement

A structural assessment of a CNC router table is demonstrated in this project.

In this project a frequency analysis of a disc brake is demonstrated.

To study harmonics of test jig under static load

Identifying the critical frequencies and Eigenmodes of the VAWA

Simulation to check on the eigenfrequencies and modes of a fastener. Copied from @lr2015mp

Simple Epoxy Granite Router Sim, First try

Simulation of a Part of the Mendel Frame with Eigenfrequency and harmonics at those frequencies

Tutorial project for a thermal analysis of a differential casing. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Mesh upload for component  for @ITECHENG's project

In this project the eigenfrequencies and the corresponding eigenmodes of a rotor have been computed with SimScale.

Test the strength of an Hanger submitted to vertical loads

Frequency | SimScale Project Library | Page 75