Frequency

The Frequency analysis type is used to calculate the natural frequencies of constrained or free parts and assemblies. Besides the numerical value of the eigenfrequencies, the results provide insights into the deformation behaviour of the corresponding eigenmodes. | Page 74

In this project a structural and an eigenfrequency analysis of a front wing is demonstrated.

Bend plate Y 0.02m modal analysis.

Original project of @kaz_puttenaers

This project shows the frequency analysis of the truss bridge for first 20 eigenmodes.

CAD model from @rbr_ning - Flow simulation and an eigenfrequency analysis performed. CFD pre processing done with Onshape.

In this project two holder assembly models harmonic analysis was performed. Both models were taken from lr2015mp.

In this project an eigenfrequency and two static analyses of a motorbike are demonstrated.

In this project a frequency analysis of a disc brake is demonstrated.

In this project the eigenfrequencies and the corresponding eigenmodes of a rotor have been computed with SimScale.

A jet engine mount is analyzed regarding its harmonic response to the vibration of the jet engine.

In this project a frequency analysis of crankshaft is demonstrated.

This project contains everything you need to work on the second homework assignment of the drone workshop

Copy of @pthomas's geometry. Did a frequency analysis with it.

This project contains everything you need to work on your homework assignement

Simulation of test rig of a rotor stator cavity

In this project frequency and harmonic analysis of the Hayabusa engine were performed.

This is my second homework and contains a Frequency and Harmonic Analysis.

With this project the impact of the mesh order and fineness on the eigenmodes of a simple beam is shown.

Muffler model from @jetmufflertech - incompressible demo flow simulation + eigenfrequency study.

Frequenzanalyse einer Stimmgabel, welche auf 440 Hz schwingen sollte.

This project conducts a dynamic analysis of a pinned bar under gravitational load

General analysis of a PCB board.
Vibration analysis of PCB and casing.
Project from the session on 02 02 2016

This acoustics simulation shows the frequency analysis of the Olympic Tower in Munich with first ten natural eigenfrequencies.

This project performs the calculation of eigenfrequencies of an unconstrained sphere.

In this project, a Solid Mechanics Frequency Analysis was done to determine the eigenfrequencies and corresponding eigenmodes - vibrational modes - of a tuning fork

A structural assessment of a CNC router table is demonstrated in this project.

Frequency | SimScale Project Library | Page 74