Conjugate Heat Transfer v2.0

Conjugate heat transfer v2.0 is a multi-purpose analysis type capable of simulating fluid flow and heat transfer including: solid/fluid conduction, natural or forced convection, and thermal radiation. The solver supports heat sources derived from the Joule heating of electronic circuits and both surface to surface and solar radiation. An arbitrary number of solid and/or fluid regions may be simulated. By solving both the flow fields and heat transfer equations simultaniously, this solver is ideally suited for but not limited to applications such as: electronics cooling, heat exchangers, and HVAC systems. Learn more. | Page 68

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Tests pour les analyses de méca flux (ici, tube pour protéger la fibre optique)

análise térmica a uma bateria de areia com convecçao natural

Adiabatic_VS_Derived all building material are brick with same thickness and thermal conductivity

Temperature distribution of a heat exchanger

this project goal is to evaluate the difference in cooling effectiveness between series and parallel cooling tube of an EV Battery Module.

The cooling strategies used to maintain the battery under 40C are cooling tubes places between the rows of cells. Inside the aluminium channel extrusions flows a coolant made of water and glycol.

LED Spotlight project, aiming a bring the temperature of the diodes of a LED spotlight design below the maximum allowed temperature of 100C. A Conjugate Heat Transfer v2.0 analysis is used.

Conjugate Heat Transfer v2.0 | SimScale Project Library | Page 68