Conjugate Heat Transfer (legacy)

Conjugate heat transfer (legacy) has been replaced by Conjugate Heat Transfer v2.0 and will shortly no longer be available for use. You can only see it here as you have been granted access based on an exceptional condition. Therefore we strongly recommend to use CHT v2.0 as a default and consult with your simscale support staff if you feel Conjugate Heat Transfer (legacy) is required for your application. | Page 89

The heat input to the boiler is via a single flue tube heated with a propane gas nozzle. Water inlet is at the same end as the inlet to the flue tube. Water outlet is at the top of the boiler at the opposite end to inlet.

Heat sink with heat transfer coefficient assigned to outer  tank walls

Thermal Comfort model from public project

CHT with counterflow air separated by an aluminum pipe

It's about the simulation of thermal camera

Thermal analysis of RTC 6705 chip used in  VC-400 FPV Polar Anneta Camera

Conjugate Heat Transfer (legacy) | SimScale Project Library | Page 89