Conjugate Heat Transfer (legacy)

Conjugate heat transfer (legacy) has been replaced by Conjugate Heat Transfer v2.0 and will shortly no longer be available for use. You can only see it here as you have been granted access based on an exceptional condition. Therefore we strongly recommend to use CHT v2.0 as a default and consult with your simscale support staff if you feel Conjugate Heat Transfer (legacy) is required for your application. | Page 31

Simulasi transfer panas dari udara menuju tube

This project aims to showcase the different configuration options for the standard meshing tool, including basic and advanced settings. The various refinements are also covered.

Closed loop system with 4 Peltier elements and 2 fans.

CONJUGATE HEAT TRANSFER: sensor 0,4 mm, thermistor distance 2,4

Testing of different types of blowing systems for aluminum coil annealing furnaces

Thermal analysis for water jacket of motor

Simulasi transfer panas dari udara panas menuju logam dingin

Conjugate heat transfer simulation tutorial.

convective heat transfer for diff conditions

This simulation aims a determining whether the temperature of the board of 2x 160W COB Series UV LED is below the recommended temperature of 40C  with a water cooling block running with 0.2m/s inlet velocity.

3D model from Philippe Cavalier (https://grabcad.com/library/water-cooling-led-heatsink-1)

Conjugate Heat Transfer (legacy) | SimScale Project Library | Page 31