Conjugate Heat Transfer (legacy)

Conjugate heat transfer (legacy) has been replaced by Conjugate Heat Transfer v2.0 and will shortly no longer be available for use. You can only see it here as you have been granted access based on an exceptional condition. Therefore we strongly recommend to use CHT v2.0 as a default and consult with your simscale support staff if you feel Conjugate Heat Transfer (legacy) is required for your application. | Page 3

This project aims at validating the heating capacity of the HVAC system of a 3 story residential building, the indoor air quality design, and the thermal comfort in winter conditions (-20C /50 humidity) - Copy

heat_exchanger_lotm_practica_9 - Copy - Copy

A project that tests a detailed thermal model of a simple component in a test environment to create a network resistance model to be validated in the same environment. The project aims at providing a basis for thermal characterisation of other components, and to show how the resistance model is implemented and used in SimScale. - Copy

Heat Transfer Analysis of a Spiral Heat Exchanger: In this project Conjugate Heat Transfer Simulations were performed to find out temperature distribution inside the heat exchanger. From the temp. distribution, outlet conditions were obtained to evaluate the effectiveness of this particular configuration. - Copy

Heat Sink. 
20 semiconductors. 
Fan inlet. - Copy

Testing geometries with varying x configurations to see how it changes.

Copy of project by agirin on battery pack cooling - Copy

Kühlung eines Stabes durch erzwungene Konvektion

Conjugate heat transfer simulation to analyse the thermal performance of water cooled transistors. - Copy

Conjugate Heat Transfer (legacy) | SimScale Project Library | Page 3