Compressible

Find projects using the compressible analysis type here. | Page 203

Using the software SimScale, you must design a nozzle, with a 10 cm length, outlet orifice 10 mm, inlet orifice 20 mm, outlet pressure 1 bar, and inlet velocity 10 m/s.
Doing this problem with two different fluids: water and air.

Tasca 1, treball enginyeria fluidodinàmica.

Design a nozzle, with a 10 cm length, outlet orifice 10 mm, inlet orifice 20 mm, outlet pressure 1 bar, and inlet velocity 10 m/s.

Comparing the four different Spectre designs we have

Flow study of a 3d printable water rocket prototype

Using the software SimScale, you must design a nozzle, with a 10 cm length, outlet orifice 10 mm,
inlet orifice 20 mm, outlet pressure 1 bar, and inlet velocity 10 m/s.
Doing this problem with two different fluids: water and aire.

Flow analysis of a centrifugal flow gas turbine engine prototype

The goal is to simulate multiple wings for  a project, and evaluate which is the most suitable.

Compressible | SimScale Project Library | Page 203