SimScale simulation projects by asalgado_arreg | Page 1

asalgado_arreg's profile

In this exercise, we will consider the deflection of a cantilever beam with a concentrated load at the free end. We can calculate the deflection by hand and via a static analysis using the SimScale platform.

Geometrías actualizadas para la sección Análisis de flujo de fluido incompresible de dos válvulas de globo del curso Introducción a la ingeniería asistida por computadora (CAE) - www.simscale-academy.com

Incompressible Fluid Flow analysis of two globe valves

In this exercise, you will use linear static analysis to analyze several configurations of an aircraft engine bracket under a vertical load.

In this exercise, you will complete a laminar pipe flow analysis

In this exercise, you will perform a simple heat transfer analysis on the SimScale Platform and then compare the results to a hand-calculated solution.

En este ejercicio, completará un análisis de flujo de tubería laminar.

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Public Profile

asalgado_arreg's profile