SimScale simulation projects by anupam2690 | Page 1

anupam2690's profile

Simulate the impact on head W/o  helmet with a Nonlinear Dynamic Analysis

Multi-phase flow simulation. sample tank filling case setup. The channel is enclosed by walls on all sides with an open boundary for the top face. Initially there will be column of water in the fall area, while water enters from an Inlet and discharges into the column. The rest of the domain is filled with air as the base medium.

Thermal behavior of a front differential casing will be simulated. The objective of this simulation is to analyze how hot the casing will get in operation mode as well as if there are any hot spots visible that could be avoided with a more suitable casing design.

Tutorial project for a thermal analysis of a differential casing. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Public Profile

anupam2690's profile