SimScale simulation projects by alexlehmanrubio | Page 1

alexlehmanrubio's profile

Characterization  of a  simple 3 blade prop, through different RPM vaues, to be used for comparison against a 4 blade prop

Second try at simulating the flow around the rotating propeller

Characterization of a Snapshot 4 blade propeller. Comaprison with a 3 blade prop

Initial CFD run to test SimScale capabilities

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Public Profile

alexlehmanrubio's profile