SimScale simulation projects by aayush_wadhwa1 | Page 1

aayush_wadhwa1's profile

Tutorial for meshing of valve geometry with Snappy Hex Mesh

This  project analyzes the aerodynamics of a spoiler

This tutorial shows how to analyze the Heat transfer in a heat sink.

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Tutorial project for setting up the mesh using Hex-dominant automatic for external flow.

Tutorial project for a thermal analysis of a differential casing. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

In this tutorial, a aerodynamic analysis of a F1 frontwing is presented. The flow around the wing is modeled as an incompressible, turbulent flow using a k-epsilon turbulence model. This tutorial is based on the first part of the SimScale F1 Simulation workshop series about aerodynamics.

Tutorial project for setting up a Multi-phase flow simulation

Tutorial project for Aerodynamic simulation of compressible flow over Airfoil

Sample project for how to set-up the Hex-Dominant Parametric mesh for flow around a vehicle body.

Tutorial for In-compressible Turbulent flow through a cyclone seperator

Tutorial project for setting up the Automated Hex-dominant for internal flow for an angled pipe geometry.

This meshing tutorial shows how to setup the Tetrahedral automatic, Tetrahedral parametric and the Tetrahedral with local refinements for a structural analysis simulation.




Public Profile

aayush_wadhwa1's profile