SimScale simulation projects by Oilmiky | Page 1

Oilmiky's profile

Testing the boundary conditons for the heat load calulations of the  house with the known heat load.
House dimensions: 10x10x3 m
Wall thickness 150mm, wall thermal conductivity 0.038W/m/C
Tin: 20.5C, Tout: -35C
Heal load: 0.038/0.15*320*55.5 equals to 4500 Watt

Testing export from Revit to Simscale for a single round duct CFD

Based on youtube video: Ductwork sizing, calculation and design for efficiency: HVAC Basics and full worked example by The Engineering Mindset

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Public Profile

Oilmiky's profile