SimScale simulation projects by Master_Luchak | Page 1

Master_Luchak's profile

2 Stator - Control
2 Stator - Beefed up Version

List of  simulations to run
1. Control simulation on the current, 4 stator and 5 blade fan design
2. Repeat the simulation of 1 with 5 stator vanes instead of 4
3. change the cross section of the vanes to be an airfoil instead of flat.
4. Alter the angle of twist if airfoils, starting and ending
5. Alter motor housing
6. Add an external motor cone design.
7. Round out the inlet of fan duct
8. Narrow the outlet

Distance between bottom duct and fan  decreased

Test to see if a model without any rotating regions runs any mesh issues.

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Tutorial project for a stress analysis of a connecting rod. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Public Profile

Master_Luchak's profile