SimScale simulation projects by Ahmet_Besmi | Page 1

Ahmet_Besmi's profile

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

This is most accurate design of the final nose which we have selected for the car. Now I need to run tests to get accurate measurements.

This is another prototype nose which has been inspired by Formula Student. I will be testing for how many Newtons of drag this design will produce compared to others.

No.1 Nose will be tested according to different lengths

I will now test a prototype nose that is shaped like a cone. Results from this can lead me to test a composite nose (mix between conic and flat bottom) that is symmetrical on both axes.

Aerodynamics Test for Greenpower F24+ Car

Multiple Tests for the Aero of the new BHASVIC Greenpower Car

Aerodynamics Test for the Pod Movement Team competing in Greenpower F24+

This test will be used to carry out the same experiment with a different prototype nose

The same test will be carried out on a different prototype nose for Greenpower

This test will be used to check the aerodynamics of a Greenpower Car nose with varying length.

Testing aerodynamics for a new body shell idea

This simple body design will be tested for use in Grenpower F24

This is currently the final prototype I have. This nose is very similar to my composite nose, but it will be symmetrical on both axis instead of being tilted. I will use results from this test to select a suitable prototype and improve on it before manufacture

This is the second test for aero parts of the car. This will use a different prototype nose

Public Profile

Ahmet_Besmi's profile